https://mega.nz/#!kkxEAaib!gXrR7d_nX7WpRv6X1YkRBiRoqp7F-VYKodnTP0ErtbM
No pass!
Free download VAG ODIS V4.0.0 crack + PostSetup 30.0.290 if you need:
https://mega.nz/#!z8RUkY4C!1y0KNHHzef4jjtXCdnfi6H6Y1aRvwXjAo2lk3JH9QrM
ODIS VAG 4.0 ONLY no launcher (Unknown security)
https://mega.nz/#F!2dY3lYSA!ZPUpmEl8kcldN7Q9TUVOog
ODIS VAG 4.0 launcher+ license.zip (Tested individually)
https://mega.nz/#!hRIn0aDT!WV_S_yaUbOwLGAiKs5M1LjXdrmPaY8xOFBbGceMoPJk
Referred link:
VAS 5054A ODIS 3.0.3 Multilingual in 64G U Disk
Safe and tested 100% OK by users! Recommended!
ODIS VAG 4.0.0 and ODIS 3.0.3 compatible interface:
VAS 5054A with OKI chip Bluetooth
VXDIAG VCX NANO VAS 5054A
ODIS VAG 4.0 what’s new?
Support for Windows 7/ Windows 10 64 bit operating system
Support VW, AUDI, SKODA, SEAT Bentley and Lamborghini till 2017 year
Optimization of performance in the diagnostic input
Detection of VAS 6154 via subnets
Support for non-convergent measures in the GFF
Integration of the Bugatti brand
A list of ODIS VAG 4.0 Bugfixes
- Deviation in EcuCom work for KWP2000 “ECU coding”
- ODIS installation error message – Cannot call proc – Actia API PDU
- Blinking with a large data container, the flash session does not start
- Fuel system cannot be evacuated // Illegible level
- Flash abort PROGRAMMING ERROR at Audi A1 Bremse (TPI 2033217/3)
- ODIS overwritten when switching from USB to Bluetooth
- Bluetooth connection type: No new connection has been established after theDiagnostic test was again within range of the VAS5054A.
- Crash at start of application
- Update 3.0.2 fails with ODS4010E: UpdateProcess failed with 11
- Query error memory hangs: “Read command units (33%)”
- Configuring the connection when switching Bluetooth USB takes too long
- WLAN Infrastructure Authentication Issue with RADIUS Server
- EVA 6154 is searched on the wrong interface, after the end of theDiagnostic session
- SingleBuild Service Installation Odis, a “Runtime Error” configuration message forRecovered testers
- DA_14 in the AU48X DSD not possible
- VCI 5054 connection termination for Windows user change
- ODIS texts Interface: German texts have been removed from XML files(Vaudas.texts)
- ODIS Service does not present the version of diagnostic data for humans in the
- Calibration instruction must be adjusted.
- The buttons are displayed in part in the wrong language (instead of GermanEnglish).
- The symbol of the status icon changes with the ODIS end
- Buttons to start CCR and choose your own review missing
- The EN-US language renouncement date is not displayed correctly
- In the installation dialog, the EN_US language is displayed twice
- Voice checkback leads to corrupted feedback file (invalid XML)
- VW VIN vehicle project cannot be opened // running ODS8003E in the systemPROJECT_OPENED state not possible.
- VCI-number on DISS protocol
No comments:
Post a Comment